ZHONGKE HS616e Digital Ultrasonic Flaw Detector

The HS616e Enhanced TFT digital ultrasonic flaw detector is a human-orient designed product, it has high light TFT screen, the background color and brightness can be set according to environment, make it clear display under high-light or low-light environment; it has 2 operation modes, the digital knob realize one-bottom operation, it also has keyboard operation mode; it has spectrum analysis functions,with high speed FFT processing, it able to measure the performance of transducer.
Features

A. General
The HS616e Enhanced TFT digital ultrasonic flaw detector has high light TFT screen;
The background color and brightness can be set according to environment; make it clear display under high-light or low-light environment.
The digital knob realize one-bottom operation
Spectrum analysis functions, with high speed FFT processing, able to measure the performance of transducer
High performance lion-battery for longtime work

B. Pulse
Amplitude: selectable within 200V, 300V, and 400V; suitable for wide range of probe Duration: 100ns~300ns adjustable with step of 2ns; match the best sensitivity in different frequency probe when testing
Damp match: 51Ω,150Ω,200Ω,400Ω, meet requirements of different sensitivity and resolution
Probe mode: dual or single transducer

C. Testing range 0~14000mm

D. Signal condition
High speed sampling: 150MHz sampling rate
Rectify mode: dual, plus, minus and RF wave display
Gates: single gate, dual gates, hold peak within full screen waveform or hold peak within gate Gain: Setting by step 0.1dB, 1dB, 2dB or 6dB; Gain can be automatically set according to echo amplitude

E. Alarm
Sound and light alarm according to the amplitude compared with DAC in gate

F. Data saving 50 sets of testing parameters can be calibrated and preset. User can preset the testing parameters according to the testing standards for various industries; and the testing parameters can be saved, recalled, edited, printed and sent to PC easily. 1000 sets of testing waveform and data can be saved, recalled, printed, and sent to PC easily.

G. Other functions
Hold the peak and peak time
Calculate the equivalent diameter of defects
Measure the defect height with diffraction signal of defect tips
Record and replay the dynamic testing waveform
Locating defect with surface distance, depth, and sound path
Sizing the defect with SL value
Record the envelops waveform of defect to ease evaluating
Correcting the error caused by coved face
Real time gain compensation with penetrate time
Display the defect location in weld saw section
B-scan display

H. Real time recording
Record the real time and date of testing

I. interface
-High speed USB 2.0
-RS232

J. Auto protect the screen
Applications:
-Weld Inspection
-Forgings Inspection
-Steel Plate Inspection
-Crack detection and sizing
-Power generation inspection
-Aerospace and maintenance
-Automotive industry

parameters Amplitude selectable within 200V, 300V, and 400V
Duration 100ns~300ns adjustable with step of 2ns
Damp match 51Ω,150Ω,200Ω,400Ω
Probe mode dual or single transducer
Testing range 0~14000mm
Sampling 150MHz sampling rate / 8bits
Frequency range 0.5-4MHz, 2-8MHz, 10MHz, 2MHz-20MHz
Gain range 110dB (adjust with a step selected from 0.1dB, 1dB, 2dB,and 6dB)
Sound speed 100m/s~20000m/s
Dynamic range ≥30dB
Vertical linear error ≤3%
Horizontal linear error ≤0.1%
Horizontal resolution >40dB
Surplus sensitivity >62dB
Rejection 0%~80% Noise ≤10% |
Power voltage 220VAC or 7.2VDC
Battery work time 5 hours
Temperature -10~40℃
Humidity 20%~95%
Size 215×165×45(mm)
Weight 1.4Kg



Copyright © 2015 DNT Inspection Service Co., Ltd. All Rights Reserved. Design by W3layouts